Issue link: https://resources.rand3d.com/i/1134349
training@rand.com www.rand3d.com 877.726.3243 Creo Parametric 7.0 Training Cable and Harness Design Learning Guide Contents Chapter 1: Process Overview • 1.1 Electromechanical Overview Chapter 2: Overview and Environment • 2.1 Cabling Process Overview • 2.2 Cabling Terminology • 2.3 Create a New Cabling Assembly • 2.4 Set Up Environment • 2.5 Set Up the Configuration File Chapter 3: Electromechanical Model Setup • 3.1 Placement Models • 3.2 Electromechanical Models • 3.3 Obtaining Models • 3.4 Cable Activation • 3.5 Harness Creation Chapter 4: Designation and Parameters (Manual) • 4.1 Manually Designate Models • 4.2 Electromechanical Model Parameters • 4.3 Assign Parameters Chapter 5: Spools (Manual) • 5.1 Manual Spool Creation • 5.2 Modifying Spools • 5.3 Storing and Retrieving Spool Files Chapter 6: Cabling Features (Manual) • 6.1 Wire, Cable, and Ribbon Features Chapter 7: Logical Reference Technique • 7.1 Introduction to Logical References • 7.2 Logical Reference Options • 7.3 Designate Models Using Logical References • 7.4 Entry Ports from Logical References • 7.5 Spools from Logical References • 7.6 Cabling Features from Logical References • 7.7 Modifying Component Parameters • 7.8 Benefits of Logical References Chapter 8: Routing Methods • 8.1 Introduction to Routing • 8.2 Route Wires and Cables • 8.3 Route with Bundles Chapter 9: Modifying Cabling Assembly • 9.1 Cabling Tab • 9.2 Route Group • 9.3 Modify Menu • 9.4 Locations Group • 9.5 Logical Data and Components Groups Chapter 10: Additional Routing Features • 10.1 Add Splices • 10.2 Terminator Tables • 10.3 Strip Length Tables • 10.4 Cabling Cosmetic Features Chapter 11: Networking • 11.1 Introduction to Network • 11.2 Preliminary Information • 11.3 Network Setup • 11.4 Autorouting Wires and Cables • 11.5 Troubleshooting Network • 11.6 Network Options Chapter 12: Cabling Assembly Deliverables • 12.1 System Bill of Materials • 12.2 Cabling Information • 12.3 Location Information Chapter 13: HARNESS-MFG • 13.1 HARNESS-MFG Introduction • 13.2 Harness MFG File Structure • 13.3 Harness Flattening • 13.4 Model Placement in a Flattened Harness • 13.5 Modifying a Flattened Harness • 13.6 Harness Information Chapter 14: Harness Manufacturing Deliverables • 14.1 Creating a Nail-Board Drawing • 14.2 Printing Nail-Board Drawings