training@rand.com www.rand3d.com 877.726.3243
Creo Parametric 10.0 Training
Design Documentation and Detailing
Learning Guide Contents
Chapter 1: Views
• 1.1 General Steps for Drawings
• 1.2 Create a New Drawing
• 1.3 Drawing Mode Interface
• 1.4 Place the First Drawing View
• 1.5 Place Additional Views
• 1.6 Modify View Properties I
• 1.7 Drawing Options
Chapter 2: View Manipulation
• 2.1 Modify View Properties II
• 2.2 Manipulate Drawing Views
• 2.3 Configuration Options
Chapter 3: Detailing a Drawing
• 3.1 Show Detail Items
• 3.2 Create Dimensions
• 3.3 Manipulate Detail Items
• 3.4 Customizing Options
Chapter 4: Project Labs 1 and 2
Chapter 5: Drawing Notes
• 5.1 Create and Modify Notes
• 5.2 Customizing Options
Chapter 6: Tolerances
• 6.1 Showing Dimensional Tolerances
• 6.2 Set Tolerance Standards
• 6.3 Datum Feature Symbols
• 6.4 Create Geometric Tolerances
• 6.5 Syntax Checking
• 6.6 Handling Legacy Datums
• 6.7 Datum Targets
• 6.8 Drawing Configuration Options
• 6.9 Drawing Setup File Options
Chapter 7: Project Lab 3
Chapter 8: Assembly Drawings
• 8.1 Add Models
• 8.2 Explode Assembly Views
• 8.3 Change Component Display
• 8.4 Display Cross-Sections
• 8.5 Modify Assembly Views
Chapter 9: Drawing Tables
• 9.1 Create a Table
• 9.2 Create Repeat Regions
• 9.3 Create Hole, Point, and Axes Tables
Chapter 10: 2D Sketching
• 10.1 Create 2D Entities
• 10.2 Modify 2D Entities
• 10.3 Group 2D Entities
• 10.4 Convert to Draft Entities
Chapter 11: Symbols
• 11.1 Create Symbol Geometry
• 11.2 Place a Custom Symbol
• 11.3 Symbol Palette
• 11.4 Surface Finish Symbols
Chapter 12: Feature Management
• 12.1 Hide Items
• 12.2 Suppress Items
• 12.3 Add Layers
• 12.4 Create Assembly Simplified Representations
• 12.5 Part Simplified Representations
• 12.6 Review and Tools Tab
Appendix A: Drawing Formats and Templates
• A.1 Create a Drawing Format
• A.2 Import Formats
• A.3 Add Tables to a Format
• A.4 Parametric Text
• A.5 Add a Drawing Format
• A.6 Create Drawing Templates
Appendix B: Object Linking and Embedding
• B.1 Object Linking and Embedding
Appendix C: Print and Export Options
• C.1 Print and Export Options