Issue link: https://resources.rand3d.com/i/1494304
3DEXPERIENCE 2022x: 3D Tolerancing and Annotation 1–20 © 2022, ASCENT - Center for Technical Knowledge® 1.6 Drawing Creation Using the 3D T&A app simplifies the creation of drawing views. In the same way that drawing views can be extracted directly from the model, annotated views can also be taken directly from the model into the 2D drawing. This ability ensures that all engineering information is stored and extracted directly from the 3D model. It also enables the design and manufacturing process to minimize its reliance on the drawing for output. General Steps Use the following general steps to create a drawing using an annotated model. 1. Create a new drawing. 2. Extract a view from the 3D model. 3. Align the drawing views. With the annotated model open, create a new drawing. The tolerance standard and drawing standard must be the same to display an annotated view from a model. Before creating any drawing views, tile the widgets so that selections between the model and drawing can be facilitated. If the part and drawing widgets are open within the same tab, right-click on the tab and select Tile Horizontally. If the drawing and part widgets are in different tabs, you can toggle between widgets by selecting the tabs they are in. In the expanded View Layout section of the Action Bar within the Drafting app, click (View from 3D). Expand the specification tree for the annotated model and select an annotation plane in the Views branch. The system previews the annotated view in the drawing window. Position and orient the view using the drawing compass and then select anywhere in the drawing background to generate the view. Step 1 - Create a new drawing. Step 2 - Extract a view from the 3D model. Sample provided by ASCENT for review only All copying and reuse strictly forbidden.