Introduction
© 2023, ASCENT - Center for Technical Knowledge® 1–9
Once the first wall has been created, additional walls and bends
can be added. Additional walls can be created using the Wall,
Extrude, and Wall on Edge operations. As well, flanges can be
constructed using the Basic Flange, Hem, Tear Drop, and User
Flange operations.
Figure 1–9 shows the sheet metal model started in the last step,
with two walls and a tear drop flange added.
Figure 1–9
Step 3 - Create the secondary walls and
bends.
First wall
Both walls created using the
Wall on Edge operation
Tear drop flange
Sample
provided
by
ASCENT
for
review
only
All
copying
and
reuse
strictly
forbidden.
