Introduction
© 2023, ASCENT - Center for Technical Knowledge® 1–11
1.4 Mixing Applications on Sheet
Metal Parts
Part Design
App
No additional features can be created in the SMD app when a
Part Design app feature is applied to a sheet metal model. For
example, if a Part Design feature is created on a sheet metal
part, the error message shown in Figure 1–12 opens when the
next sheet metal feature is created.
Figure 1–12
To resolve this, the Part Design feature should be removed. Solid
models created in the Part Design app can be converted into a
sheet metal part using the Recognize function. All features
applied to sheet metal models should be created in the SMD app
to preserve model compatibility.
Sample
provided
by
ASCENT
for
review
only
All
copying
and
reuse
strictly
forbidden.
