3DEXPERIENCE CATIA 2022x: Sheet Metal Design
1–10 © 2023, ASCENT - Center for Technical Knowledge®
Once the walls of the sheet metal part are created, additional
features are created to complete the model. Sheet metal
features consist of Stamps, Corners, Chamfers, Cutouts, and
Holes. Figure 1–10 continues the example from the previous
steps. Surface Stamps, Cutouts, Corners, and Chamfers have
been added to the model.
Figure 1–10
Once the sheet metal model is completed, drawings and DXF
files can be created to output the file for manufacture. Unfolded
views can be created in a drawing to display the unfolded model,
as shown in Figure 1–11.
Figure 1–11
Step 4 - Create the sheet metal features
(cutout, stamp, etc.).
Step 5 - Create the deliverables (drawings).
Surface Stamp
Cutout
Corners
Chamfers
Sample
provided
by
ASCENT
for
review
only
All
copying
and
reuse
strictly
forbidden.
