Assembly Operations
© 2019, ASCENT - Center for Technical Knowledge® 1–17
You are prompted to use Save Management when attempting to
save a file with links to other modified documents. For example,
when a product is saved and contains a part that has been
altered, the prompt box shown in Figure 1–19 opens.
Figure 1–19
If you proceed with the Save option, only the selected document
is saved and not the other modified documents. Instead, try
clicking Cancel to abort the Save option and then using the
Save Management or Save All option to avoid problems.
Send To
The Send To option copies a product and all of its linked files to
a specified directory or attaches them to an e-mail. This option
ensures that all of the files required to open a product file are
included in an e-mail or moved with the product file.
How To: Perform a Send To Operation
1. Select File>Send To>Mail or File>Send To>Directory. The
Send to dialog box opens. The top window lists the selected
product file and all of the files linked to it, as shown in
Figure 1–20.
In this example, Send
To Directory was
selected. The Send To
Mail dialog box is the
same but does not have
the Copy to field at the
bottom of the dialog
box.
Figure 1–20
Sample
provided
by
ASCENT
for
review
only
All
copying
and
reuse
strictly
forbidden.
