CATIA V5-6R2018: Advanced Assembly Design and Management
1–20 © 2019, ASCENT - Center for Technical Knowledge®
Practice 1a Assembly Creation
In this practice, you will create an assembly using a variety of
assembly constraints. The completed model displays, as shown
in Figure 1–25.
Figure 1–25
Task 1 - Create a Product file.
1. Select File>New and create a new Product file.
2. In the specification tree, right-click on Product1 and select
Properties.
3. For the part number for the product, enter 71499 and click
OK.
4. Select Tools>Options to open the Options dialog box.
Expand General and select Parameters and Measure.
5. Select the Units tab.
6. Set units for length to Millimeters(mm).
7. Save the product in the Turbine directory with the name
CompressorRotor.
Practice Objectives
• Create a Product file.
• Assemble components.
Sample
provided
by
ASCENT
for
review
only
All
copying
and
reuse
strictly
forbidden.
