CATIA V5-6R2018: Advanced Assembly Design and Management
1–28 © 2019, ASCENT - Center for Technical Knowledge®
5. Add a third constraint to orient 5thStage. Zoom in on the
locating tab of 6thStage, as shown in Figure 1–39.
Figure 1–39
6. Click (Angle Constraint) and create a Parallelism
constraint between the surface of 6thStage shown in
Figure 1–40 and the surface of 5thStage shown in
Figure 1–41. Ensure that the Orientation is set to Same.
Figure 1–40
Zoom in to the
locating tab
Select this surface
Sample
provided
by
ASCENT
for
review
only
All
copying
and
reuse
strictly
forbidden.
