CATIA V5-6R2018: Introduction to Modeling
1–10 © 2019, ASCENT - Center for Technical Knowledge®
Specification Tree
The specification tree is available when working with parts,
assemblies, and drawings. It displays a variety of information
about the model and displays the features of the part in the order
in which they were created, as shown in Figure 1–11. This
provides quick access to parameters, functions, materials, and
commonly used measurements.
The specification tree
can be quickly toggled
on and off by pressing
.
Figure 1–11
Compass
The compass is available for part and assembly models. It
displays in the upper right corner of the model window and can
perform various functions, as shown in Figure 1–12. The
compass is used to:
• Freely rotate the model in all three directions.
• Rotate the model in a plane.
• Pan along one direction.
• Pan in a plane.
• View down an axis direction by selecting the X, Y, or Z letter.
Selecting again flips the view in the opposite direction.
Sample
provided
by
ASCENT
for
review
only
All
copying
and
reuse
strictly
forbidden.
