Overview
© 2019, ASCENT - Center for Technical Knowledge® 1–27
Task 9 - Cause a feature to fail.
1. In the specification tree, double-click on .
2. Modify the radius of the fillet to 30.00 mm (1.181 in) and click
OK.
The radius of the fillet is too large and causes the
EdgeFillet.5 feature to fail. An Update Diagnosis dialog box
opens, as shown in Figure 1–38.
Figure 1–38
3. Undo the changes made to the Fillet feature and resolve the
failure by clicking (Undo).
Task 10 - Open a drawing of the part to verify it has been
updated.
1. In the toolbar, click (Open) to open the drawing.
2. In the File Selection dialog box, select
Flange_Lock.CATDrawing.
3. Click Open.
Sample
provided
by
ASCENT
for
review
only
All
copying
and
reuse
strictly
forbidden.
