CATIA V5-6R2018: Introduction to Surface Design
1–10 © 2019, ASCENT - Center for Technical Knowledge®
Figure 1–8 shows an example of a group of wireframe features
that are used to develop a surface model.
Figure 1–8
Once the wireframe geometry has been created, surface
features are required to define the internal and external
boundaries of the model. Surface features can be created
independent of the rest of the model, or by using existing
wireframe and surface geometry as references. You can create
the following types of surface features:
Step 2 - Create surface geometry.
• Extrude • Sweep
• Revolve • Fill
• Sphere • Multi-sections
• Cylinder • Blend
• Offset
Sample
provided
by
ASCENT
for
review
only
All
copying
and
reuse
strictly
forbidden.
