3DEXPERIENCE 2022x: Introduction for Managers and Reviewers
1–14 © 2022, ASCENT - Center for Technical Knowledge®
Robot
The Robot is available for part and assembly models. It displays
in the upper right corner of the model window and can perform
various functions, as shown in Figure 1–15. The Robot is used
to:
• Freely rotate the model in all three directions.
• Rotate the model in a plane.
• Pan along one direction.
• Pan in a plane.
• View down an axis direction by selecting the X, Y, or Z
letter. Selecting again flips the view in the opposite
direction.
Figure 1–15
Click and drag the arc
to rotate the model in
the YZ plane only
Click and drag on the
plane to pan the model
in the XY plane only
Select X, Y, or Z to
view down the axis
Click and drag the
straight axis to pan
the model along the
XY direction
Sample
provided
by
ASCENT
for
review
only
All
copying
and
reuse
strictly
forbidden.
