Solid Modeling Overview
© 2022, ASCENT - Center for Technical Knowledge® 1–29
2. Click and drag the curved edge of the XY plane to rotate the
model about the Z-axis only, as shown in Figure 1–35.
Figure 1–35
3. Repeat Step 4 for the other two curved edges.
4. Return to the Isometric quick view.
5. Click and drag the X-, Y-, and Z-axes of the compass to
translate the model along that direction, as shown in
Figure 1–36.
Figure 1–36
Task 6 - Use the mouse to dynamically rotate, pan, and
zoom the model.
Click (Fit All In) to
center your model in the
graphics window.
1. Return to the Isometric quick view and fit the entire model in
the window.
2. Hold the middle mouse button and move the cursor to pan
the model.
Try repeating these
mouse shortcuts when
possible.
3. Hold the middle mouse button and then left-click (or
right-click) once. Move the cursor up and down to zoom in
and out.
4. Press and hold the middle mouse button and then press and
hold the left mouse button (or right mouse button)
simultaneously, and move the cursor to rotate the model.
Click here to rotate about the
Z-axis
Click here to translate
along the Y-direction
Sample
provided
by
ASCENT
for
review
only
All
copying
and
reuse
strictly
forbidden.
