Solid Modeling Overview
© 2022, ASCENT - Center for Technical Knowledge® 1–35
Task 10 - Cause a feature to fail.
1. In the specification tree, double-click on EdgeFillet.2.
2. Modify the radius of the fillet to 30.00 mm (1.181 in) and click
OK.
The radius of the fillet is too large and causes the
EdgeFillet.2 feature to fail. An Update Diagnosis dialog box
opens, as shown in Figure 1–47.
Figure 1–47
3. Select Close, and undo the changes made to the Fillet
feature and resolve the failure by clicking (Undo).
4. Click (Share)>Save to save the model.
5. Close the part tab.
Sample
provided
by
ASCENT
for
review
only
All
copying
and
reuse
strictly
forbidden.
