3DEXPERIENCE 2022x: 3D Tolerancing and Annotation
1–30 © 2022, ASCENT - Center for Technical Knowledge®
6. Select the Position.1 tolerance, as shown in Figure 1–28. It
also highlights the geometry associated to the tolerance
(Datum Reference Frame A|B|C and Hole.2).
The other annotations
are hidden in
Figure 1–28 to simplify
the display of the model.
Figure 1–28
Task 4 - Modify the model.
The dimensional annotations are associative to the geometry on
which they are based. In this task, you modify the Multipad base
feature and then update the model to view changes to the
associated annotations.
1. In the specification tree, expand PartBody and then
Multipad.1. Double-click on Sketch.1. The sketch for the
multipad feature displays.
2. Double-click on the 2.559 dimension shown in Figure 1–29.
Figure 1–29
Select
Position.1
Modify this
dimension.
Sample
provided
by
ASCENT
for
review
only
All
copying
and
reuse
strictly
forbidden.
