3DEXPERIENCE 2022x: 3D Tolerancing and Annotation
1–16 © 2022, ASCENT - Center for Technical Knowledge®
Active View
The active view plane is identified by a red border on the model.
In the specification tree, the active view displays with a blue
highlight and it is underlined, as shown in Figure 1–10. If no view
planes exist, one is created that accommodates the annotation
being defined.
Figure 1–10
To activate a view plane, double-click on the view in the
specification tree. You can also activate the view by
double-clicking the view frame on the model.
Dimensions and tolerances should be added as early as
possible to support the datum reference frames and geometrical
tolerances that are added to the model.
Dimensions can be toleranced using one of the following
methods:
• General Tolerance (e.g., 90)
• Numerical Values (e.g., 90 )
• Tabulated Values (e.g., 90 H7)
• Single Limit (e.g., 90 MIN)
Some dimensions and tolerances have been added to the part,
as shown in Figure 1–11.
Step 3 - Create dimensions and tolerances.
Active view
0.1
Sample
provided
by
ASCENT
for
review
only
All
copying
and
reuse
strictly
forbidden.
