Sample Chapters - CATIA

Part Design Overview © 2023, ASCENT - Center for Technical Knowledge® 1–11 Use the drawing shown in Figure 1–7 to create the model. Figure 1–7 The part will be molded. To ease the process of removing the part from the mold, apply a 0.2deg draft to the correct faces. Sample provided by ASCENT for review only All copying and reuse strictly forbidden.

• Cover Page
• Copyright
• Contents
• Preface
• In This Guide
• Chapter 1: Part Design Overview
• 1.1 Part Design Philosophies
• 1.2 Maintaining Design Intent
• Practice 1a Capturing Design Intent in Sketcher
• Practice 1b Locking Insert
• Practice 1c (Optional) Sketcher Analysis
• Practice 1d (Optional) Sketcher
• Chapter Review Questions