Part Design Overview
© 2023, ASCENT - Center for Technical Knowledge® 1–7
Practice 1a Capturing Design Intent in
Sketcher
The intent of this practice is to demonstrate how design intent
can be captured using sketcher tools and techniques. As with
every modeling process, you should use the simplest and most
effective methods of capturing design intent. A proficient
3DEXPERIENCE user can create robust models that enable
design changes to be made quickly and easily, resulting in
predicable changes throughout the model.
Create the part using the following information:
• Figure 1–2 shows an isometric view of the completed pipe
model.
• Figure 1–3 shows the design requirements that must be
captured.
• Figure 1–4 shows the dimensioned drawing views.
Figure 1–2
Practice Objective
• Use the sketcher tools to capture design intent.
Sample
provided
by
ASCENT
for
review
only
All
copying
and
reuse
strictly
forbidden.
