3DEXPERIENCE CATIA 2022x: Advanced Part Design
1–12 © 2023, ASCENT - Center for Technical Knowledge®
Practice 1c (Optional) Sketcher Analysis
In this practice, you will create the cooling fins for an aluminum
heat sink extrusion. The base geometry has been created for
you, as well as the sketch that defines the cooling fin geometry.
Use the Sketch Analysis tool to solve the problem(s) with the
sketch. The completed model displays as shown in Figure 1–8.
Figure 1–8
Practice Objective
• Create a model with limited instructions.
Sample
provided
by
ASCENT
for
review
only
All
copying
and
reuse
strictly
forbidden.
