3DEXPERIENCE CATIA 2022x: Advanced Part Design
1–16 © 2023, ASCENT - Center for Technical Knowledge®
8. Exit the Sketcher app. The model displays as shown in
Figure 1–15.
Figure 1–15
Task 4 - Create a Pad.
In this task, you will create a Pad feature using the sketch that
you just analyzed. Because the sketch still contains open
sections, the application continues to display the Feature
Definition Error message until the Thin option is selected in the
Pad Definition dialog box.
Select Yes, if prompted
to use the selected
sketch.
1. Use the parameters shown in Figure 1–16 to define Pad.2.
Select the back face of the part for the up to plane reference.
Sample
provided
by
ASCENT
for
review
only
All
copying
and
reuse
strictly
forbidden.
