Overview
© 2019, ASCENT - Center for Technical Knowledge® 1–23
Task 5 - Use the mouse to dynamically rotate, pan, and
zoom the model.
Click (Fit All In) to
center your model in the
graphics window.
1. Return to the Isometric quick view and fit the entire model in
the window.
2. Hold the middle mouse button and move the cursor to pan
the model.
Try repeating these
mouse shortcuts when
possible.
3. Hold the middle mouse button and then left-click (or
right-click) once. Move the cursor up and down to zoom in
and out.
4. Press and hold the middle mouse button and then press and
hold the left mouse button (or right mouse button), and move
the cursor to rotate the model.
Task 6 - Use the specification tree to review the model
geometry.
1. In the specification tree, select Multipad.1 (you might need to
expand PartBody by clicking the + symbol). The feature
highlights in orange in the tree and on the model, as shown in
Figure 1–29.
Figure 1–29
2. Repeat Step 1 for each feature under the PartBody branch
(i.e., Pad.1, Hole.1, Pocket.2, Mirror.1, etc.). The selected
feature is highlighted on the model and in the specification
tree.
Sample
provided
by
ASCENT
for
review
only
All
copying
and
reuse
strictly
forbidden.
