Overview
© 2019, ASCENT - Center for Technical Knowledge® 1–25
3. In the specification tree, double-click on .
4. In the Hole Definition dialog box, change the Diameter to
13.00 mm (0.512 in), and click OK. The updated model is
shown in Figure 1–33.
Figure 1–33
Task 8 - Delete features.
1. Select the edge fillet shown in Figure 1–33.
2. Right-click and select Delete.
3. Delete Sketch.6 from the specification tree, as shown in
Figure 1–34.
Figure 1–34
Select this edge
fillet to delete
Change
this hole
Sample
provided
by
ASCENT
for
review
only
All
copying
and
reuse
strictly
forbidden.
