3DEXPERIENCE 2022x: Introduction for Managers and Reviewers
1–20 © 2022, ASCENT - Center for Technical Knowledge®
Use the Re-center on Geometry function to rotate the model
around a specific location on the model or geometry. Click the
middle mouse button on the required geometry or model location
to re-center the model. Then, use the Rotate function to spin the
model around the centered geometry.
Preselect Navigator
The Preselect Navigator tool enables you to select geometric
entities that are hidden or difficult to select on a model. The
software lists all entities that exist beneath the current cursor
position and enables you to scroll through this list to select the
required entity.
How To: Use the Preselect Navigator
1. Position the cursor over the geometry that you want to select.
2. Press the or . The software lists
all entities that are beneath the current cursor position, as
shown in Figure 1–23. A display window opens, indicating the
currently highlighted entity.
Figure 1–23
3. To scroll through the list, continue pressing the
or . Press the and
to navigate the possible selections for the active component
only. You can also navigate the list using the cursor.
4. To select an entity for further operation, select it from the list
using the cursor or press .
Visual display of
highlighted entity
Sample
provided
by
ASCENT
for
review
only
All
copying
and
reuse
strictly
forbidden.
