Videos & Webcasts

Learn about Dassault and PTC solutions from Rand 3D experts.

  • Part Install Visualization made easy with CATIA V5 Path Finder51:30

    Part Install Visualization made easy with CATIA V5 Path Finder

    Have you ever struggled to see if something can be installed/disassembled in CATIA V5 after the fact? In this webcast, you'll learn to develop a track for the movement of a part or sub-assembly, detec

    Watch
  • CATIA Engineering Excellence1:10

    CATIA Engineering Excellence

    CATIA Engineering Excellence provides you with the ability to reduce time-to-market, reuse existing components, enrich your design with complex shapes, validate your design and collaborate with your e

    Watch
  • Creo Parametric 6.0 Updates48:42

    Creo Parametric 6.0 Updates

    Learn what's new inversion 6.0 of the Creo Parametric software.

    Watch
  • Creating Multi Section Features in CATIA V5 and the 3DEXPERIENCE50:23

    Creating Multi Section Features in CATIA V5 and the 3DEXPERIENCE

    The Multi-Section feature is a powerful tool and is one of the fundamental ways to create complex geometry in CATIA and the 3DEXPERIENCE. Understanding the Multi-Section features and many advanced opt

    Watch
  • Sketcher Outputs in CATIA V59:49

    Sketcher Outputs in CATIA V5

    Utilizing the four output commands within the sketcher workbench will allow sketch entities to be segmented individually, allowing for quick creation of shapes. In this video, Rand 3D Technical Traine

    Watch
  • Tip: Adding an offset to a manikin segment in CATIA4:58

    Tip: Adding an offset to a manikin segment in CATIA

    When performing a reach study on a human manikin, adding an offset is sometimes necessary to add when the manikin is using hand tools. In this video, see how to attach a tool, add an offset, and perfo

    Watch
  • Tip: Adding Balloon Callouts to an Assembly Drawing10:37

    Tip: Adding Balloon Callouts to an Assembly Drawing

    See how to add balloon callout to an assembly drawing which requires generating the numbering convention, bill of material, and drawing balloons. Also included in this video is how to place the Bill o

    Watch
  • Advanced Laws in CATIA Kinematics29:06

    Advanced Laws in CATIA Kinematics

    In CATIA Kinematics, you'll learn about the use of laws to simulate motion using a single parameter in this on-demand session.

    Watch
  • Adaptive Sweep Surface Essentials in CATIA V535:56

    Adaptive Sweep Surface Essentials in CATIA V5

    See how to create a CATIA V5 or CATIA V6 adaptive sweep surface and explore additional advanced surface creation elements that give you more control over capturing the true intent of complex geometry.

    Watch
  • Creo Parametric's Offset Feature55:10

    Creo Parametric's Offset Feature

    See how you can use Creo Parametric's Standard Offset, Expand, With Draft, and Replace Surface Features.

    Watch
  • Tip: Creating a Manikin Simulation in CATIA V58:03

    Tip: Creating a Manikin Simulation in CATIA V5

    In this video, Technical Trainer Trisha West shows the two methods of creating a manikin motion file: a simulation using saved manikin postures in a catalog, and creating a track with a manikin object

    Watch
  • Tip: How to execute a manikin hand grasp in CATIA V58:05

    Tip: How to execute a manikin hand grasp in CATIA V5

    In this video, Technical Trainer Trisha West steps you through placing an object near the manikin, executing a manikin hand grasp and attach the object to the manikin. To learn more about this topic,

    Watch
  • Designing Better Products with CATIA’s Engineering Optimizer Workbench35:43

    Designing Better Products with CATIA’s Engineering Optimizer Workbench

    Get an introduction to CATIA's Product Engineering Optimizer (PEO) workbench, which provides engineers with easy-to-use tools that can be used to optimize any type of data.

    Watch
  • Working with Legacy Datums in Creo Parametric 41:01:54

    Working with Legacy Datums in Creo Parametric 4

    Learn the basics of how to replace set datums with datum feature symbols in Creo Parametric 4.0.

    Watch
  • Scene Creation and Application in CATIA V545:36

    Scene Creation and Application in CATIA V5

    See the basics of how to create a Scene in CATIA V5 and explore its uses in Assembly and Drawings.

    Watch
  • Sweep Feature Essentials in Creo Parametric47:14

    Sweep Feature Essentials in Creo Parametric

    See the basics of how to create a Creo Parametric Sweep feature and explore advanced options.

    Watch
  • Creating Creo Parametric Blends13:51

    Creating Creo Parametric Blends

    Technical Trainer, Trisha West demonstrates the complexities behind the Creo Parametric blend function, including the importance of start point alignment and adding a blend vertex. This topic is cover

    Watch
  • CATIA Tech Tip: CATIA V5 Coupling Options for Multi-Section Solids13:42

    CATIA Tech Tip: CATIA V5 Coupling Options for Multi-Section Solids

    Technical Trainer, Trisha West, demonstrates how the four different coupling methods (ratio, tangency, tangency then curvature, and vertices) can affect your final multi-section, and how to use coupli

    Watch
  • Creating and Managing Scenes in CATIA V518:42

    Creating and Managing Scenes in CATIA V5

    Follow along as Technical Trainer, Trisha West, discusses how to create, manage and apply scenes on assemblies in CATIA V5. Also discussed is the difference between full and partial overload modes an

    Watch
  • Creo Parametric Tip:  Ruled Based Chain Selection2:00

    Creo Parametric Tip: Ruled Based Chain Selection

    When creating or editing features using Creo Parametric, you may need to select a chain of edges or curves that are related either by tangency or a common vertex. Join Rand 3D Technical Trainer, Natas

    Watch
  • loading
    Loading More...