This video shows CATIA users how to link a text value (parameter) that is created in a part and associate it to text in the drawing file. If the parameter changes in the part then it can be updated easily in the drawing. For more info on this topic, check out our Generative Drafting class. View the Blog post: https://blogs.rand.com/rand3d/2018/10/how-to-create-an-attribute-link-in-catia.html
Related Content
In this post, we will explain how to set up and run CATIA in admin mode in general, as well as how to lock options and settings for the end-users.
CATDUA is a part of CATIA V5 and a tool for repairing errors in CATIA files. CATDUA has many helpful uses and we strongly recommend using CATDUA before exporting a CATIA model to an external format.
Learn about Flexible vs. Rigid Sub-Assembly in this CATIA Assembly Design software tip.
What can we do when we know there’s a command we want in CATIA, we know the name of it, but we just can’t find it anywhere? Find out how to solve this problem in our blog post.
While point or tangency continuity is sufficient for most mechanical designs, curvature continuity is usually required for visually pleasing industrial designs that involve using polished surfaces.
Today we’re back in the Sketcher workbench. The plan is to create a Shaft so I’ve started drawing the sketch but the the line I’ve drawn needs to be an Axis instead of a standard line.
Let's look at a scenario that sometimes arises when using the “View from 3D” function in the Drafting workbench.
Measurements, by default, tend to take priority on the screen. If you create a measurement, it’ll “float” on top of any existing geometry. But if you want to turn it off, here's a quick tip to do that
Learn how with the Multi-Pad, you are able to draw all of the shapes in a single sketch and let them naturally snap to each other so it’s easier to build.
The CATIA Profile tool is a great way to draw a lot of connected lines and arcs all together. Having to pick the arcs from the Sketch Tools can get a little old.
Ever find yourself using the same command over and over and over? It’s kind of annoying to have to click the same icon so… many… times.
Here’s a pretty common scenario: You need to start a sketch for a part – maybe it’s a block – and to get everything nice and organized, you’ve got to center it.
51:30Have you ever struggled to see if something can be installed/disassembled in CATIA V5 after the fact? In this webcast, you'll learn to develop a track for the movement of a part or sub-assembly, detec
Utilizing the four output commands within the sketcher workbench will allow sketch entities to be segmented individually, allowing for quick creation of shapes. In this video,...