CATIA Tip: Sketcher Booleans

In today’s edition of CATIA Tips in a Minute or Less, we’re looking at another way to save some mouse clicks and some time. Once again, our focus is in the Sketcher workbench.

It’s pretty common to create a sketch that is built from several basic shapes. The general approach is to draw these shapes, then use the Trim commands to cut off any excess geometry. Below, I’ve drawn two rectangles, then double-clicked Quick Trim and knocked out the extra pieces in the middle.

That works, but there’s a faster method: Boolean Operations. As of version V5-V6R2018, Booleans aren’t just limited to bodies; they can also be performed in Sketches. This time, after drawing the second rectangle, immediately right-click it and head to the object menu. In there, pick Add, which will combine the two shapes, saving the hassle of having to manually trim these.

Of course, this is just the tip of the iceberg when using Booleans in Sketcher. For further reading, check out this blog post by my colleague CATIA V5: Sketcher Boolean Operations or stay tuned  for the next installment of CATIA Tips in a Minute or Less.

About the Author

Scott Henderson

Technical Training Engineer<br><br>Scott Henderson is a Dassault Systèmes Certified Instructor. With expertise in CATIA, DELMIA, and ENOVIA, he has been leading training classes and providing on-site customer support since 2006, focusing primarily in the Automotive industry.

More Content by Scott Henderson
Previous Article
CATIA Tip: Converting a Line to an Axis
CATIA Tip: Converting a Line to an Axis

Today we’re back in the Sketcher workbench. The plan is to create a Shaft so I’ve started drawing the sketc...

Next Article
CATIA Tip: Center Rotation
CATIA Tip: Center Rotation

Learn how to rotate a model in CATIA while keeping it centered on the screen.

Get Hands-On CATIA Training

Learn More